PP Hollow Board Signboard in Malaysia

RM1,400 for one 20 × 4 ft board — the standard Malaysian shop-lot fascia. That is the whole sign, not a starting point: the welded mild steel frame, the 4mm PP hollow board face, and your artwork UV-printed on sticker and applied. Installation is chosen separately and starts at RM800 for a ground-floor shopfront.

Because it is the same job. One PP hollow board is 20 × 4 ft, and a smaller sign still uses that board, still needs a frame welded and primed, still takes one print and one crew. So anything up to 20 × 4 ft is RM1,400 — a 10 × 2 ft sign included. There is one discount: when the longer side is 6.67 ft or less, a third of a board, you pay half — so a 5 × 2 ft sign is RM700. Going over one board means buying another whole board, so 20 × 6 ft is RM2,800 and 40 × 8 ft, the largest we make, is RM5,600. We will make anything from 1 sq ft upward, but below a third of a board the price stops falling.

Included: the welded, anti-rust primed mild steel frame; the 4mm twin-wall PP hollow board face; your artwork UV-printed on sticker and applied; and a designer file check before anything prints. Not included: on-site installation, which you pick by floor level below, and delivery if you choose supply only — collect from our Seri Kembangan shop, or we send it by Lalamove at the live rate.

Yes — it is the Malaysian shopfront workhorse for a reason. Twin-wall polypropylene is completely waterproof and will not rot, warp or delaminate the way a wood-cored board does in sun and rain, and it is light enough to span a wide fascia without sagging or loading the frame. If you want the premium aluminium look instead, that is the ACP Panel Board Signboard at RM3,200 a board; if you want the sign to glow after dark, the PP Hollow Board Lightbox is RM2,400.

Yes, in KL and Selangor. Pick the floor level in the Installation list and the charge is in your price before you pay: Ground floor RM800, 1st floor RM1,300, 2nd RM1,900, 3rd RM2,600, 4th RM3,400, 5th RM4,300. Above the fifth floor the access is beyond what a standard rate can cover, so our installer prices it after a site survey. KL & Selangor only. Installing it yourself? Pick "Supply Only" and we hand the finished sign over at our Seri Kembangan shop, or send it by Lalamove at the live rate. Installation is a required choice on this listing: the charge swings RM800 to RM4,300 on floor level alone, so we ask rather than guess and undercharge you.

14 working days from payment to a finished sign — fabrication, print and the installation visit included. That is a date you can plan an opening around, not an estimate that moves once we open the file. Send artwork as AI, EPS, PDF or a high-resolution image; if all you have is a logo and a shop name, say so and we will lay it out. A designer checks your artwork and confirms the layout with you before anything is cut or printed, and that check is free.