Skip to main content
Made in Malaysia
Ready date shown per product
Free File Check
instant price by size · self-service

Metal Letters in Malaysia

Laser-cut metal letters in a flat sheet — 304 stainless in hairline, mirror, gold or black for lobbies and building names, and electro-galvanised Colourbond steel where the job wants an outdoor fascia letter at a shopfront price. Both hang the same way, on studs off the wall, and both are a thin plate rather than a fabricated box.

From RM 50.00 · instant price · free file check

Configure & price

Also called: stainless letters · stainless steel letters · steel letters · flat cut metal · huruf besi · huruf stainless

Cut & fabricated to order · 7 working days
Metal Letters

Metal Letters

1 / 2

1. Choose your material

Material colour

Selected: 1mm Hairline Stainless. Your price updates with the size below.

2. Your lettering

YOUR BRANDLETTERS + LOGOOVERALL WIDTHOVERALL HEIGHT

One size for your complete design. Include all words and logos. Measure the artwork itself, without extra wall space around it.

Budget tip: Reduce large gaps between letters or words to keep your design more compact. A smaller overall width can lower the price, subject to the minimum charge. Keep the lettering easy to read, and measure again after adjusting the spacing.

Your design RM 390.00

Upload one artwork file below. We check the shapes and fine details before production.

Same artwork, size & options on every copy.
Different design or size? Add it as a separate cart item.

3. Choose the look & mounting

How will you mount it?

4. Your artwork

One artwork file for the complete sign. Use the same design for every copy.

How would you like to supply your artwork?
  1. 1Upload your file
  2. 2We check it
  3. 3We print
Large file? Share a link instead

Paste a shared Drive, Dropbox or WeTransfer link. Allow access so we can download it.

Colour advice & optional colour matching

Screen colour ≠ printed colour

Your screen glows in RGB; we print CMYK ink on material. Bright and neon colours print more muted — typical shifts below. For exact brand colours, send CMYK or Pantone values in your file, or choose the colour-matched service.

▲ top: on your screenbottom: printed (approx.) ▲

Want the detail? RGB vs CMYK · Convert a colour · Free CMYK chart (PDF) · Why prints vary

Your design appears here

1mm Hairline Stainless · 1mm thick

600 × 400 mm·60.0 × 40.0 cm
1mm Hairline Stainless (600×400 mm)RM 390.00
TotalRM 390.00

Need it by? Standard ready Tue 27 Oct, 6pm–12amExpress is not available on this range.Estimated after payment & artwork approval; delivery takes additional time.

Standard

Ready Tue 27 Oct, 6pm–12am

7 working days · no extra charge

Express is not available on this range.

A courier collects your order the working day after its ready date, and arrival in Peninsular Malaysia is estimated the working day after that. Sabah, Sarawak and international destinations take longer; the booked service may vary.

This order takes 7 working days, ready 6pm–12am on working day 7; an order confirmed (paid and artwork approved) before 2pm counts that day as day 0. Weekends and public holidays are excluded.

Shipping is calculated by packed size, weight and destination. Create a verified account for 5% off your first paid order, up to RM10. Shipping and packing are separate.

Instant price · No account needed · Pay with DuitNow, FPX or card

Not sure about size, material or your file? Ask us on WhatsApp

1mm Hairline Stainless

1 piece

RM 390.00

Delivery & packing at checkout.
⚡Instant pricing

See your exact price as you configure — no waiting for a quote.

✓We check your file

Automatic preflight plus a designer review before anything is cut.

📦Track every step

Follow your order from approval to fabrication to delivery.

Metal Letters FAQs

How much do metal letters cost in Malaysia?
From RM 50.00. Enter the overall width and height of your complete artwork, including all words and logos. Your price updates with the material, size, finish and mounting choices. Upload one file for the complete sign.
What size should I enter?
Measure the leftmost to rightmost edge and topmost to bottommost edge of your complete artwork, including all lines and logos together. Do not include extra wall space. We check fine details before production.
Stainless or EG Colourbond steel?
Both are a flat laser-cut plate and both hang the same way; what differs is the money and how long the finish lasts. Stainless 304 is the lobby and building-name answer — it holds its finish in city and coastal air, wipes clean, and the gold and black are PVD, meaning the colour is bonded into the steel in a vacuum chamber rather than sprayed on top, so there is nothing to flake off after a year. EG Colourbond is zinc-coated steel with a factory white finish, and it is roughly a third of the price: the everyday Malaysian shopfront letter, sprayable in your brand colour, and cheap enough to take down and re-spray when the brand changes. If it is a reception wall or a building name, buy stainless. If it is a shoplot fascia on a budget, buy EG.
Which stainless finish should I choose?
Brushed hairline silver is the corporate default: the grain hides fingerprints, which matters on a lobby wall people walk past. Gold hairline is the same brushed surface with a gold PVD coating. Black PVD is the finish most modern office fascias specify, and it also comes in a heavier 1.5mm plate for letters over about 500mm tall that need the extra rigidity and a thicker visible edge. Mirror-polished silver is the brightest thing we cut, and gold mirror is the top of the range — what jewellers, private clinics and bridal boutiques ask for by name. Both mirrors show every fingerprint, so keep them above hand height. There is also a sprayed gold and a sprayed silver in 1.5mm, which give you the metal colour at a lower price; they are paint rather than PVD, so keep those two indoors or under shelter.
Can you paint stainless to my brand colour?
No, and that is deliberate. The finish on a stainless letter is the sheet itself, and two-pack paint does not key properly to a PVD surface — it will lift at the edges inside a year and you will be looking at a patchy letter on a lobby wall. If you need an exact Pantone or RAL, take the EG Colourbond steel in the same picker and add the 2K spray finish, which wraps the face and the cut edges in automotive paint and clear coat. That is why the paint options only appear once you select an EG material.
Does galvanised steel rust in Malaysian weather?
EG Colourbond is steel with a zinc coating and a factory colour layer, which is why it lasts on a shopfront where bare mild steel would not. The vulnerable part is the cut edge, where the laser exposes raw steel. Indoors or under a deep awning that is fine as supplied. For anything genuinely exposed to rain, take the 2K spray finish: it wraps the face and the cut edges in two-pack automotive paint and clear coat, and that is what keeps the letters clean for years rather than months. The upside over stainless is that when the brand changes these can come down, be re-sprayed and go back up.
0.5mm or 1.5mm?
0.5mm is the everyday shopfront letter — the cheapest metal letter we make, light enough that mounting is trivial, and perfectly stable indoors or on a sheltered fascia. 1.5mm is the heavy gauge: a thick, clearly visible edge from the street, and enough stiffness that a large letter on a windy outdoor fascia stays flat instead of oil-canning in the middle. Minimum letter height on this range is 50mm, because thin folded steel below that cannot hold its shape through cutting and finishing.
Can you install it for me?
We are the factory, so we do not install it ourselves — every order ships ready to self-install, with a full-size paper template included at no charge: tape it up, mark the holes through it, and every letter lands level and evenly spaced first time. That is how the same letters go up anywhere in Malaysia or overseas. If you would rather not do it, pick a floor level in the Installation list and we arrange a partner contractor in KL and Selangor: the price shown is their estimate for a standard job — from RM500 for a ground-floor wall or fascia, stepping up floor by floor as the access equipment grows — and we confirm it with you before the visit is booked. It is one visit and one charge for your whole order, whether it is 3 letters or 30, at the highest floor among them; above the 5th floor the contractor quotes after a site survey, since that means a boom lift or a gondola and a permit from the building.

Guides for metal letters

Sizes, prices and file setup, written from the same price list this page uses.

Which letter type and font to choose How 3D signboards are built and priced

More from Tandaku

Signage Boards Banners Buntings Posters Backdrops Tension Fabric Displays Acrylic Printed Sign Magnetic Sticker Fabric Signs Wind Flags & Hand Flags Transparent Window Stickers Label Stickers Canvas Prints Metal Sign Wood Sign Roll-Up Banner Board with Display Stand Tripod Bunting Stand A-Frame Display Stand Lucky Spin Stand Human Standee Wood Stand with Printing UV DTF Stickers Glow in the Dark Stickers PVC Foam Letters Acrylic Letters 3D Printed Letters Aluminium Box-Up Letters Stainless Steel Box-Up Letters Board Backdrop Stencil Plates Laser Engraved Wood Board Laser Engraved Acrylic Engraved Stainless Steel Board