3D Printed Letters in Malaysia

From RM 40.00. The price comes from the two numbers you enter above: the letter height and the overall width of the whole line of text. Taller letters cost more per metre of text, and a longer line costs more because it is simply more letters. You never have to count the letters yourself — the calculator does it, and the price updates as you type.

Letter height is the cap height of your tallest letter — a capital A measured top to bottom, not the height of the whole block of text. Overall width runs from the left edge of the first letter to the right edge of the last one, spaces included. The diagram above the size fields shows both. Two stacked lines are two order lines, one for each line. As a rule of thumb, 200–400mm letters suit a shopfront fascia read from across the road, and 80–150mm a reception wall.

Black, white and grey, printed in PLA or PETG — PETG for hot or sheltered outdoor spots, PLA indoors. The colour goes right through the letter, so the edge is the same colour as the face and a knock does not reveal something different underneath. Grey hides the fine layer lines best, which is why an unpainted grey letter still looks finished close up. Choose white if you are spraying a brand colour over it, or if you are adding LED — white edges light up. Any Pantone or RAL is available through the 2K spray option.

This is the range for shapes a cutting tool physically cannot hold: fine script fonts where the strokes join at a hair-thin point, hairline serifs, domed and chamfered faces instead of a flat top, logo marks with real relief, and any depth you ask for rather than the thicknesses a sheet happens to come in. Send the vector file or the font name and we will confirm what holds together at your chosen height before anything goes on the printer.

Yes, and it is not optional — the Add to cart button stays locked until you pick one. The modules run on 12V DC, so every lit order has to include an AC–DC driver: 100W or 300W, indoor or rainproof. Wiring the LEDs straight into 240V mains destroys them the moment you switch on, and that is not covered by warranty. Take the rainproof driver for anything outdoors, and mount it somewhere your electrician can still reach in two years.

Yes. On-site installation in KL and Selangor is one charge per job — one visit fixes every letter in your order, whether it is 3 letters or 30 — starting at RM350 for a ground-floor wall or fascia and stepping up floor by floor, because the higher the sign goes the more access equipment the job needs; above the 5th floor we quote after a site survey, since that means a boom lift or a gondola and a permit from the building. Ordering two lines of text or several letter products? Still one visit and one charge — at the highest floor among them. Doing it yourself instead? Add the full-size paper template — tape it up, mark the holes through it, and every letter lands level and evenly spaced first time.