Skip to main content
Need help? WhatsApp us →Free pickup in Seri Kembangan · Courier across Malaysia

Stencils

Laser-cut EG steel · 0.5mm or 1.5mm · Any size up to 4 × 8 ft

Stensil keluli EG dipotong laser untuk semburan cat.

Free designFree proof on WhatsAppAI pictures welcomePickup or courier
A laser-cut EG steel stencil with cut-out letteringLaser-cut steel stencil

A laser-cut EG steel stencil with cut-out lettering

A stencil laser cut from EG steel for spray-marking crates, pallets, floors, walls and parking lots. Type the outside size, then upload your stencil image or let us design it for free. Connecting lines (bridges) must be at least 5 mm wide, or the steel cannot be cut. We adjust your design for that and show you before we cut.

What's it for?

Optional: one tap sets it all

Type your size & quantity

This is the outside size of the steel plate, from 30 × 30 mm up to one 4 × 8 ft sheet. No stencil file? Choose “Design it for me, free”, then write the wording and the size of the wording or logo in the note. We draw it as a stencil and send you a proof.

Or tap a common size:

You are ordering A4, 21 × 29.7 cm, portrait.
Drawn to scale next to a 1.7 m person.

Buy more, save more: 5% off from 100 pcs of one design, 10% from 500, 15% from 2,000.

Steel

EG steel: electro-galvanised steel sheet.

EG Steel: Laser-cut steel you can spray through again and again. Keluli EG (bersalut zink)

Thickness

  • Laser cut from EG steel: electro-galvanised steel sheet
  • Use it again and again; wipe the paint off after each job
  • 0.5mm is light and lies flat; 1.5mm is thicker and stays rigid
  • Bridges at least 5 mm wide hold every letter together

When do you need it?

Mon–Fri are working days. Dates count from the day you approve your proof (by 2pm).

Artwork

AI pictures are welcome. Made your design in ChatGPT, Gemini, Canva or Meta AI? Send the image as it is. We check the size and sharpness and tell you before we print if anything will look blurry.

RM12.72 RM12.72 each × 1 Ready about Thu 26 Nov from 6pm, counted from your proof OK · about 0.2 kg
How this price is made
Stencil · EG Steel · 0.5mm (210×297 mm)RM12.72
EachRM12.72
× 1 pcsRM12.72

Live catalogue prices. Delivery and packing are shown at checkout. Express is calculated once for the whole order.

EG Steel 0.5mm · A4, 21 × 29.7 cm · 1 pc

FPXDuitNow QRTouch 'n GoGrabPayShopeePayVisaMastercard

What is a steel stencil?

A stencil is a sheet of steel with your wording, numbers or logo cut out of it by laser. Lay it on a crate, a floor, a wall or a parking bay, spray paint over it and lift it off: the mark is left behind, the same every time.

EG steel is electro-galvanised steel sheet: real steel with a zinc coating. 0.5mm is light and lies flat on the surface; 1.5mm is thicker, stays rigid and takes rougher handling.

Size: type the outside width and height of the plate, from 30 × 30 mm up to one full 4 × 8 ft sheet (1220 × 2440 mm).

Your design: upload your stencil image, or give us the outside size plus the size of the wording or logo inside and we design it as a stencil for free.

Bridges: the inside of letters like O, A and B would fall out, so thin connecting lines hold them in place. Connecting lines (bridges) must be at least 5 mm wide, or the steel cannot be cut. We adjust your design for that and show you before we cut.

Stensil keluli EG dipotong laser. Letak di atas permukaan, sembur cat, angkat. Boleh guna berulang kali.

Close-up of a steel stencil: the cut-out letters and the bridges that hold them together

Stencil thickness

Each one suits a different job. Here is how they compare, with a real-size price for each. Tap Order this to set it in the order box.

SteelEG Steel 0.5mmEG Steel 1.5mm
ExampleExample EG Steel 0.5mm signMost orderedExample EG Steel 1.5mm sign
MaterialElectro-galvanised (EG) steel sheetElectro-galvanised (EG) steel sheet
Thickness0.5 mm1.5 mm
Rigidity●●●●●●●●●●
Indoor / outdoorIndoor & outdoorIndoor & outdoor
EdgeThin steel, sits flat on the surfaceThicker steel, stays rigid
FinishBare zinc-coated steelBare zinc-coated steel
Weight, 2 × 3 ft2.1 kg6.4 kg
Best used forCrates, pallets, floors, walls, parking lotsCrates, pallets, floors, walls, parking lots
PriceRM87.23 at 2 × 3 ft
RM12.72 at A4
RM218.06 at 2 × 3 ft
RM31.80 at A4

Rigidity: how well a large stencil stays flat by itself. Want a printed metal sign instead? See Metal Sign.

Where stencils are used

Pick the place; we set the steel, size and fixing most people use there. Change anything after.

Mark crates and pallets

Mark crates and pallets

EG steel 0.5mm, 20 × 10 cm.

Numbers and logos on walls

Numbers and logos on walls

EG steel 0.5mm, A3.

Floor and walkway markings

Floor and walkway markings

EG steel 1.5mm, 50 × 50 cm.

Parking bay numbers and arrows

Parking bay numbers and arrows

EG steel 1.5mm, 100 × 50 cm.

Installation

No fixing is needed: hold or tape the stencil flat, spray, and lift it straight off.

Hold it flat
STEP 1Hold it flatLay the stencil flat on a clean, dry surface. Tape the corners or hold it down so paint cannot creep under the edges.
Spray light coats
STEP 2Spray light coatsSpray straight down from about 20 cm in two or three light coats, then lift the stencil straight up.

Care

  • Clean it. Wipe wet paint off after each job, or scrape dried paint off: built-up paint blurs the edges.
  • Store flat. Keep it flat or hang it up. A bent stencil lets paint under the edges.
  • Edges. Laser-cut steel edges can be sharp. Handle with gloves.
  • Rust. EG steel is zinc coated; keep it dry between jobs and it lasts for years.

Your artwork, any way you have it

Upload a filePDF, AI, PSD, PNG or JPG. Big files: send a Google Drive or WeTransfer link on WhatsApp.
AI pictures are welcomeMade it in ChatGPT, Gemini, Canva or Meta AI? Send the image as it is. We check the size and sharpness and tell you before we print if anything will look blurry.
No design yet? We design it freeTell us the words and send your logo. We send a proof on WhatsApp, and nothing prints until you say OK.

FAQ

What do I need to send?

Upload your stencil image, or choose “Design it for me, free” and tell us the outside size and the size of the wording or logo inside. We draw it as a stencil and send you a proof before we cut.

What are bridges?

Thin connecting lines that hold the inside of letters like O, A and B in place. Connecting lines (bridges) must be at least 5 mm wide, or the steel cannot be cut. We adjust your design for that and show you before we cut.

How much is a stencil?

It is priced by the outside size, per piece, with no minimum charge. In 0.5mm: A4 RM12.72, 30 × 30 cm RM17.64, 70 × 70 cm RM80.00, a full 4 × 8 ft sheet RM400.00. In 1.5mm: A4 RM31.80, 30 × 30 cm RM44.11, 70 × 70 cm RM200.00, a full sheet RM1,000.00.

0.5mm or 1.5mm?

0.5mm is light, lies flat and is the usual choice for crates, cartons and walls. 1.5mm is thicker and stays rigid: better for big stencils, floors and parking lots, and for rough daily use.

What is EG steel?

Electro-galvanised steel: real steel sheet with a zinc coating that helps it resist rust.

What sizes can I order?

Any outside size from 30 × 30 mm up to one full 4 × 8 ft sheet (1220 × 2440 mm), either way round.

Is anything printed on it?

No. A stencil is bare steel with your design cut out. For a printed sign, see Metal Sign.

How long does it take?

Ready in 3 working days after you approve your proof (by 2pm).

RM12.72
Ready about Thu 26 Nov from 6pm