
Mark crates and pallets
EG steel 0.5mm, 20 × 10 cm.
此页面暂未提供中文版本。 前往中文首页 →
Laser-cut EG steel · 0.5mm or 1.5mm · Any size up to 4 × 8 ft
Stensil keluli EG dipotong laser untuk semburan cat.
Laser-cut steel stencilA laser-cut EG steel stencil with cut-out lettering
A stencil laser cut from EG steel for spray-marking crates, pallets, floors, walls and parking lots. Type the outside size, then upload your stencil image or let us design it for free. Connecting lines (bridges) must be at least 5 mm wide, or the steel cannot be cut. We adjust your design for that and show you before we cut.
What's it for?
Optional: one tap sets it allType your size & quantity
This is the outside size of the steel plate, from 30 × 30 mm up to one 4 × 8 ft sheet. No stencil file? Choose “Design it for me, free”, then write the wording and the size of the wording or logo in the note. We draw it as a stencil and send you a proof.
Or tap a common size:
You are ordering A4, 21 × 29.7 cm, portrait.
Drawn to scale next to a 1.7 m person.
Buy more, save more: 5% off from 100 pcs of one design, 10% from 500, 15% from 2,000.
Steel
EG steel: electro-galvanised steel sheet.EG Steel: Laser-cut steel you can spray through again and again. Keluli EG (bersalut zink)
Thickness
Finishing
Optional: most people keep theseWhen do you need it?
Mon–Fri are working days. Dates count from the day you approve your proof (by 2pm).
Artwork
AI pictures are welcome. Made your design in ChatGPT, Gemini, Canva or Meta AI? Send the image as it is. We check the size and sharpness and tell you before we print if anything will look blurry.
| Stencil · EG Steel · 0.5mm (210×297 mm) | RM12.72 |
| Each | RM12.72 |
| × 1 pcs | RM12.72 |
Live catalogue prices. Delivery and packing are shown at checkout. Express is calculated once for the whole order.
EG Steel 0.5mm · A4, 21 × 29.7 cm · 1 pc
A stencil is a sheet of steel with your wording, numbers or logo cut out of it by laser. Lay it on a crate, a floor, a wall or a parking bay, spray paint over it and lift it off: the mark is left behind, the same every time.
EG steel is electro-galvanised steel sheet: real steel with a zinc coating. 0.5mm is light and lies flat on the surface; 1.5mm is thicker, stays rigid and takes rougher handling.
Size: type the outside width and height of the plate, from 30 × 30 mm up to one full 4 × 8 ft sheet (1220 × 2440 mm).
Your design: upload your stencil image, or give us the outside size plus the size of the wording or logo inside and we design it as a stencil for free.
Bridges: the inside of letters like O, A and B would fall out, so thin connecting lines hold them in place. Connecting lines (bridges) must be at least 5 mm wide, or the steel cannot be cut. We adjust your design for that and show you before we cut.
Stensil keluli EG dipotong laser. Letak di atas permukaan, sembur cat, angkat. Boleh guna berulang kali.
Each one suits a different job. Here is how they compare, with a real-size price for each. Tap Order this to set it in the order box.
| Steel | EG Steel 0.5mm | EG Steel 1.5mm |
|---|---|---|
| Example | Most ordered | ![]() |
| Material | Electro-galvanised (EG) steel sheet | Electro-galvanised (EG) steel sheet |
| Thickness | 0.5 mm | 1.5 mm |
| Rigidity | ●●●●● | ●●●●● |
| Indoor / outdoor | Indoor & outdoor | Indoor & outdoor |
| Edge | Thin steel, sits flat on the surface | Thicker steel, stays rigid |
| Finish | Bare zinc-coated steel | Bare zinc-coated steel |
| Weight, 2 × 3 ft | 2.1 kg | 6.4 kg |
| Best used for | Crates, pallets, floors, walls, parking lots | Crates, pallets, floors, walls, parking lots |
| Price | RM87.23 at 2 × 3 ft RM12.72 at A4 | RM218.06 at 2 × 3 ft RM31.80 at A4 |
Rigidity: how well a large stencil stays flat by itself. Want a printed metal sign instead? See Metal Sign.
Pick the place; we set the steel, size and fixing most people use there. Change anything after.

EG steel 0.5mm, 20 × 10 cm.

EG steel 0.5mm, A3.

EG steel 1.5mm, 50 × 50 cm.

EG steel 1.5mm, 100 × 50 cm.
No fixing is needed: hold or tape the stencil flat, spray, and lift it straight off.


Upload your stencil image, or choose “Design it for me, free” and tell us the outside size and the size of the wording or logo inside. We draw it as a stencil and send you a proof before we cut.
Thin connecting lines that hold the inside of letters like O, A and B in place. Connecting lines (bridges) must be at least 5 mm wide, or the steel cannot be cut. We adjust your design for that and show you before we cut.
It is priced by the outside size, per piece, with no minimum charge. In 0.5mm: A4 RM12.72, 30 × 30 cm RM17.64, 70 × 70 cm RM80.00, a full 4 × 8 ft sheet RM400.00. In 1.5mm: A4 RM31.80, 30 × 30 cm RM44.11, 70 × 70 cm RM200.00, a full sheet RM1,000.00.
0.5mm is light, lies flat and is the usual choice for crates, cartons and walls. 1.5mm is thicker and stays rigid: better for big stencils, floors and parking lots, and for rough daily use.
Electro-galvanised steel: real steel sheet with a zinc coating that helps it resist rust.
Any outside size from 30 × 30 mm up to one full 4 × 8 ft sheet (1220 × 2440 mm), either way round.
No. A stencil is bare steel with your design cut out. For a printed sign, see Metal Sign.
Ready in 3 working days after you approve your proof (by 2pm).