Outdoor Fabric Lightbox in Malaysia

RM15 per square foot, and one square foot — RM15 — is the smallest we bill. A 20 × 4 ft face is 80 sq ft, so about RM1,200. The fabric prints off a 5 ft roll and can run to 50 m, so we make it in one seamless piece as long as one side stays within 5 ft.

Yes — this is the one product in our signboard range genuinely priced by the square foot. Fabric is roll goods: we print it, cut it and sew the silicone edge to your size, so a 5 × 2 ft face is 10 sq ft and RM150. Our board signboards work the other way round, because a board is a board however much of it you use — a small PP hollow sign is still RM1,400 until it drops under a third of a board.

The UV-printed soft polyester face itself, with a machine-sewn silicone edge that snaps into an SEG aluminium LED frame. If your lightbox is already up, this is a straight replacement face — it pulls out for washing or a reprint without dismantling the box. If you need the whole lit sign built instead, the PP Hollow Board Lightbox Signboard is the complete unit — frame, LED tube set, transformer and printed face — at RM2,400 per 20 × 4 ft board.

This is the outdoor grade of our soft fabric, UV-printed for direct sun. Backlit it diffuses evenly with no glare and, because the face is one sewn piece, there are no panel joins across a wide fascia. When the shopfront gets grimy the graphic comes out and washes instead of being thrown away, and a rebrand is a new face into the same box.

Yes, in KL and Selangor. Pick the floor level in the Installation list and the charge is in your price before you pay: Ground floor RM800, 1st floor RM1,300, 2nd RM1,900, 3rd RM2,600, 4th RM3,400, 5th RM4,300. Above the fifth floor the access is beyond what a standard rate can cover, so our installer prices it after a site survey. KL & Selangor only. If there is no power point at the sign position, tick "No Electric Point at Site — Add Wiring" and our crew runs and terminates the wiring back to your supply on the same visit, for RM300. Installing it yourself? Pick "Supply Only" and we hand the finished sign over at our Seri Kembangan shop, or send it by Lalamove at the live rate. Installation is a required choice on this listing: the charge swings RM800 to RM4,300 on floor level alone, so we ask rather than guess and undercharge you.

14 working days from payment to a finished sign — fabrication, print and the installation visit included. That is a date you can plan an opening around, not an estimate that moves once we open the file. Send artwork as AI, EPS, PDF or a high-resolution image, and give us the frame’s visible face size — we add the silicone-edge allowance ourselves. A designer checks your artwork and confirms the layout with you before anything is cut or printed, and that check is free.