EG Steel Backlit Letters in Malaysia

From RM 220.00. The price comes from the two numbers you enter above: the letter height and the overall width of the whole line of text. Taller letters cost more per metre of text, and a longer line costs more because it is simply more letters. You never have to count the letters yourself — the calculator does it, and the price updates as you type.

Letter height is the cap height of your tallest letter — a capital A measured top to bottom, not the height of the whole block of text. Overall width runs from the left edge of the first letter to the right edge of the last one, spaces included. The diagram above the size fields shows both. Two stacked lines are two order lines, one for each line. As a rule of thumb, 200–400mm letters suit a shopfront fascia read from across the road, and 80–150mm a reception wall.

The face stays solid painted steel and the LED sits inside the open back, so the light spills onto the wall around the letter. By day it is an ordinary painted shopfront letter; at night it is a dark letterform in a ring of light. It is the budget route to a look that usually costs stainless money. Two things decide whether it works: the wall behind needs to be light-coloured and reasonably flat for the halo to show, and the letters need to stand a little off that wall, which is built into how we make them. If the sign must be readable from the road at night, choose the front-lit EG Steel Box-Up Letters instead.

Raw galvanised as supplied — the mill white-grey finish, included, and fine where the sides barely show. Otherwise choose 2K spray in any Pantone or RAL across the face, the sides and the back, clear-coated. For an outdoor shopfront treat the paint as compulsory rather than optional: it is what keeps water off the galvanised steel and stops rust starting at the folded edges and the welds. Minimum letter height is 80mm, so the LED modules and their wiring fit inside.

Yes, and it is not optional — the Add to cart button stays locked until you pick one. The modules run on 12V DC, so every lit order has to include an AC–DC driver: 100W or 300W, indoor or rainproof. Wiring the LEDs straight into 240V mains destroys them the moment you switch on, and that is not covered by warranty. Take the rainproof driver for anything outdoors, and mount it somewhere your electrician can still reach in two years.

Yes. On-site installation in KL and Selangor is one charge per job — one visit fixes every letter in your order, whether it is 3 letters or 30 — starting at RM350 for a ground-floor wall or fascia and stepping up floor by floor, because the higher the sign goes the more access equipment the job needs; above the 5th floor we quote after a site survey, since that means a boom lift or a gondola and a permit from the building. Ordering two lines of text or several letter products? Still one visit and one charge — at the highest floor among them. Doing it yourself instead? Add the full-size paper template — tape it up, mark the holes through it, and every letter lands level and evenly spaced first time.