PP Hollow Board Lightbox Signboard in Malaysia

RM2,400 for one 20 × 4 ft board. That is the complete lit sign: the welded steel frame, the internal LED tube set, the transformer, and a translucent face printed with your artwork so the whole board glows evenly instead of in hot spots. The only thing you supply is a power point.

Because it is the same job. One PP hollow board lightbox is 20 × 4 ft, and a smaller sign still uses that board, still needs a frame welded and primed, still takes one print and one crew. So anything up to 20 × 4 ft is RM2,400 — a 10 × 2 ft sign included. There is one discount: when the longer side is 6.67 ft or less, a third of a board, you pay half — so a 5 × 2 ft sign is RM1,200. Going over one board means buying another whole board, so 30 × 5 ft is RM4,800 and 50 × 5 ft, the largest we make, is RM9,600 (four boards). We will make anything from 1 sq ft upward, but below a third of a board the price stops falling. A 10 × 2 ft lightbox takes the same frame, the same LED run and the same transformer as a 20 × 4 ft one.

No. The internal LED tube set and the transformer are inside the RM2,400, along with the frame and the translucent printed face — nothing about the lighting is an add-on and nothing gets quoted later. What you provide is a power point within reach of the sign position.

Tick "No Electric Point at Site — Add Wiring" for RM300 and our crew runs and terminates the wiring back to your supply during the installation visit. If there is already a point at the sign position, leave it unticked — it is not a hidden requirement, and most shop lots have one.

Yes, in KL and Selangor. Pick the floor level in the Installation list and the charge is in your price before you pay: Ground floor RM800, 1st floor RM1,300, 2nd RM1,900, 3rd RM2,600, 4th RM3,400, 5th RM4,300. Above the fifth floor the access is beyond what a standard rate can cover, so our installer prices it after a site survey. KL & Selangor only. Installing it yourself? Pick "Supply Only" and we hand the finished sign over at our Seri Kembangan shop, or send it by Lalamove at the live rate. Installation is a required choice on this listing: the charge swings RM800 to RM4,300 on floor level alone, so we ask rather than guess and undercharge you.

14 working days from payment to a finished sign — fabrication, print and the installation visit included. That is a date you can plan an opening around, not an estimate that moves once we open the file. Send artwork as AI, EPS, PDF or a high-resolution image; if all you have is a logo and a shop name, say so and we will lay it out. A designer checks your artwork and confirms the layout with you before anything is cut or printed, and that check is free.