Skip to main content
Made in Malaysia
Ships in 5 working days
Free File Check
guide By Tandaku · · 8 min read

Outdoor Banner Printing in Malaysia: Materials That Survive Sun, Rain and Wind, and What They Cost

An outdoor banner in Malaysia costs RM2 per square foot on 340gsm PVC flex: a 3 x 6 ft banner is RM35.99. Which flex or mesh survives sun, rain and wind, how long it lasts, how to fix it so it does not tear, and what to ask a printer before you order.

Outdoor Banner Printing in Malaysia: Materials That Survive Sun, Rain and Wind, and What They Cost

Key takeaways

  • An outdoor banner in Malaysia costs RM2.00 per square foot on 340gsm PVC flex at Tandaku — a 3 × 6 ft banner is RM35.99 — and RM3.00 per square foot on premium 510gsm flex or mesh.
  • Rain and humidity do not harm PVC flex; wind is what tears outdoor banners, so exposure decides the material: flex for sheltered walls, mesh for fences, scaffolds, rooftops and high frames.
  • A 340gsm flex banner lasts several weeks to a few months outdoors and 510gsm is built for months; eyelets every 2–3 ft, a tie through every eyelet and a taut fit add the most life.
  • Before ordering, ask the printer the flex gsm, the ink, the eyelet spacing, whether finishing is in the price, and whether turnaround starts at payment or at artwork approval.

An outdoor banner in Malaysia costs RM2.00 per square foot on 340gsm PVC flex — a 3 × 6 ft banner is RM35.99 — and RM3.00 per square foot on premium 510gsm flex or mesh. Sun, rain and humidity are not what destroys a banner here: PVC flex does not absorb water and UV-printed colour is made for sunlight. Wind is. Choosing an outdoor banner is mostly a decision about how exposed it will be, and how it is tied up.

Which material for an outdoor banner

Thin flex, thick flex and mesh banner swatches under sun, rain and wind symbols

Where the banner goes Material Why
Under an awning or on a sheltered wall, for weeks Flex 340gsm · RM2.00/sq ft Weatherproof and the lowest cost
An exposed wall or frame, for months Premium flex 510gsm · RM3.00/sq ft Thicker, hangs flatter, stretches less at the eyelets
A fence, scaffold, rooftop, or anywhere above the ground floor Mesh · RM3.00/sq ft Wind passes through instead of pulling the banner off
Inside a shop signboard frame Banner signboard face Cut to the frame, with eyelets or a fold-back edge
A zigzag steel frame on a roof or roadside Zigzag banner, flex or mesh Eyelets spaced to suit the frame

All three banner materials are PVC-based and printed with UV-cured ink. The difference between them is thickness and wind load, not waterproofing — every one of them is fine in the rain.

What Malaysian weather does to a banner

A banner facing sun, rain, wind and humidity around it

  • Sun. UV-printed colour holds up well, but any print left facing the afternoon sun for months slowly loses its punch. Dark and saturated colours show it first.
  • Rain. PVC sheds water. The problem is a slack banner, which lets water pool and adds weight at the lowest eyelets. A taut banner drains.
  • Wind. The afternoon storm is what tears banners — always at the eyelets or corners, where the pull is concentrated. A solid banner in an exposed spot behaves like a sail.
  • Humidity and dirt. A banner in a damp, shaded spot can grow mould on the dirt that settles on it. It rinses off with a hose and a soft brush.

How long an outdoor banner lasts

A 340gsm flex banner holds up for several weeks to a few months of Malaysian sun and rain, which suits most promotions and events. 510gsm premium flex is worth its extra cost for a banner that stays up for months, or in a spot where it is pulled hard by the wind. A mesh banner lasts longest on fences and high frames simply because it is not fighting the wind.

Three habits add months to any banner: take it down before a big storm, check and re-tighten the ties after the first week, and store it rolled with the printed side out — creases in flex are permanent.

How to fix a banner so it survives the wind

A banner edge with eyelets every few feet and a tie through each one

  1. Choose eyelets every 2–3 ft for anything larger than about 3 × 6 ft or anywhere exposed. On a 4 × 8 ft flex banner that is RM69.93 instead of RM63.99 with four corner eyelets — the cheapest insurance you can buy.
  2. Tie through every eyelet, not just the corners. Cable ties or rope work; elastic ties let the banner give in a gust instead of tearing at the eyelet.
  3. Pull it taut. A banner that flaps fatigues and splits at its fixings.
  4. Use mesh instead of cutting wind slits. Half-moon cuts in a solid banner weaken the sheet and give tears a place to start; mesh does the same job without the damage.
  5. Use pole pockets for poles. A sewn top-and-bottom pocket spreads the load along the whole edge and costs nothing extra.

For a free-standing outdoor sign rather than a hung banner, only a few stands survive wind — the heavy 80 × 120 A-frame (RM150) and a bunting on a water-filled T-bar base (RM71.64 with a 60 × 160 cm print). See banner stands compared.

Designing an outdoor banner people can read

A driver reading a large bold banner from across a road

  • Letter height: 1 inch for every 10 ft of reading distance. A banner read from a car 60 ft away needs letters about 6 inches tall.
  • Say one thing. Brand, offer and a phone number or website is already a lot for someone driving past.
  • High contrast, bold type. Thin fonts and mid-tone colours disappear at a distance and in bright sun.
  • Keep text away from the edges — about 3 inches — where eyelets and ties go.
  • Set the file up at the finished size, 50–100 dpi for a banner read from across a road. The pixel sizes for every standard banner are in banner size for printing.

What to ask a printer before you order

A customer at a print shop counter with a checklist and material samples

These questions separate an outdoor banner that lasts the campaign from one that tears in its first storm — with Tandaku's answer to each:

Ask Why it matters Tandaku
What gsm is the flex, and is mesh available? Thin flex tears at the eyelets 340gsm, 510gsm and mesh
What ink? Outdoor needs UV-resistant print UV-cured ink
Are eyelets included, and how far apart? Four corners is not enough for large banners 4 corner eyelets free; every 2–3 ft as an option
Is the quoted price for my exact size, finishing included? Quotes often leave finishing out Price shown for your size and finishing before you pay
When does the turnaround start? "24 hours" from payment rarely survives a file fix 5 working days from artwork approval, or next working day with Express
Is my file checked before printing? Wrong size or low resolution is expensive at banner scale Automatic preflight plus a designer review
Can I collect it or get it the same day? Deadlines Free pickup in Seri Kembangan, same-day Lalamove in the Klang Valley, courier nationwide

Outdoor advertising on buildings and public roads is regulated by local councils, so check before putting a banner up somewhere public.

Outdoor banner prices

One piece, cut to size, four corner eyelets included. Live prices on 12 September 2026:

Size Flex 340gsm Premium 510gsm Mesh
3 × 6 ft RM35.99 RM54.00 RM54.00
4 × 8 ft RM63.99 RM95.99 RM95.99
10 × 3 ft RM59.98 RM89.98 RM89.98
20 × 4 ft RM159.99 RM240.02 RM240.02

A 10 × 3 ft face for a signboard frame is RM74.94 on 340gsm flex; a 10 × 3 ft zigzag banner is RM59.90 in flex or RM78.00 in mesh. For every finishing price and the express fee, see banner printing prices in Malaysia.

FAQ

What is the best material for outdoor banners in Malaysia?

PVC flex for a banner on a sheltered wall or under an awning — 340gsm for a few weeks to months, 510gsm for longer — and mesh for fences, scaffolds, rooftops and anything high and exposed. Rain and humidity do not harm PVC; how much wind reaches the banner decides the material.

How much does an outdoor banner cost in Malaysia?

RM2.00 per square foot on 340gsm flex at Tandaku, so a 3 × 6 ft banner is RM35.99 and a 4 × 8 ft is RM63.99 with four corner eyelets included. Premium 510gsm flex and mesh are RM3.00 per square foot.

How long does an outdoor banner last?

A 340gsm flex banner lasts several weeks to a few months in Malaysian sun and rain. 510gsm flex is built for months, and mesh lasts longest in windy spots. Taking a banner down before storms and re-tightening its ties after the first week extends its life.

Is a PVC flex banner waterproof?

Yes. PVC flex does not absorb water and the UV-cured print is made for outdoor use. Keep the banner taut so rain runs off instead of pooling, and rinse off any dirt or mould with a hose and a soft brush.

Should I choose mesh or flex for an outdoor banner?

Mesh when wind can reach it — fences, scaffolding, rooftops, high frames. Flex when it sits flat against a wall or under shelter, because flex costs less and prints denser colour. Mesh and 510gsm flex are the same price, RM3.00 per square foot.

How do I stop an outdoor banner from tearing in the wind?

Order eyelets every 2–3 ft, tie through every eyelet, and pull the banner taut so it does not flap. Use mesh in exposed spots instead of cutting wind slits, and take the banner down before a big storm.

What size should the letters on an outdoor banner be?

About 1 inch of letter height for every 10 ft of reading distance. A banner read from 60 ft away needs letters around 6 inches tall, so keep the message short and the type bold.

Price your outdoor banner

Enter your size on the banner configurator, choose flex or mesh, and pick eyelets every 2–3 ft for an exposed spot — the price is on screen before you pay. Related reading: mesh banner printing · standard banner sizes · outdoor signage in Malaysian weather

Get your sign printed

Instant pricing · free file check · delivery across Malaysia.

Get an instant quote