The most-ordered floor-standing banner in Malaysia is the 85 × 200 cm roll-up at RM75; the cheapest is a tripod bunting stand with a printed 60 × 160 cm bunting at RM34.64. Which one you need depends on three things: how big the message has to be, whether it lives indoors or outdoors, and how many times it will be packed and set up again. This guide puts the stands side by side with its live price on 3 October 2026.
Which banner stand for which job
| You need | Buy this | Price |
|---|---|---|
| A tall banner beside a door, counter or booth, used many times | Roll-up banner 85 × 200 cm | RM75 (economy) / RM122 (premium) |
| A vertical bunting outside a shop or in a car park | Tripod or T-bar bunting stand | From RM34.64 |
| A rigid board on a stand: menu, notice, welcome sign | Board display stand or tripod poster stand | RM45 / RM25 + board |
| A pavement sign that stays put in wind | A-frame 60 × 90 or 80 × 120 | RM95 / RM150 + board |
| A life-size cut-out of a person or product | Human standee | From RM51.65 at 60 × 160 cm |
| A booth back wall or photo wall that travels | Pop-up backdrop 3 × 3 or 4 × 3 | From RM1,053 with print |
| A wide backdrop you assemble yourself | Jumbo banner stand up to 8 × 8 ft | RM180 + banner |
| A fabric wall, tower or counter that packs into a bag | Tension fabric display | From RM232.70 |
Roll-up banner: the default
A roll-up (also called a pull-up or retractable banner) is a spring-loaded cassette with the printed banner rolled inside; pull it up, hook it on the pole, done. At 85 × 200 cm it is the size every exhibition organiser plans around, and the roll-up banner comes with the printed synthetic-paper insert and a carry bag.
- Economy, RM75. Aluminium cassette, plastic end caps. Fine for a launch, a roadshow month, a shop entrance.
- Premium aluminium, RM122. Heavier base, smoother mechanism, survives being packed and set up every week for a year.
Choose the premium only if it travels. In a fixed spot the economy stand does the same job. Full guide: roll-up banner sizes and prices.
Tripod and T-bar bunting stands
A tripod bunting stand holds a tall narrow printed bunting on a floor stand, for a doorway, lift lobby, car park or the walkway outside a shop. The bunting is priced by area and the stand is an add-on:
| 60 × 160 cm bunting on 380gsm flex | Price |
|---|---|
| Print only, no stand | RM20.64 |
| With tripod stand | RM34.64 |
| With T-bar stand, round disc base (indoors) | +RM35.25 |
| With T-bar stand, water-fillable base (outdoors) | RM71.64 |
The tripod is the cheapest and the lightest, which is also its weakness outdoors. For a pavement or a car park, the water-base T-bar stays upright in wind once the base is filled.
A-frames, board stands and standees
These hold a rigid printed board rather than a flexible banner, so the message stays flat and can be read from both sides.
| Stand | Stand only | With a printed 5 mm KT board |
|---|---|---|
| Board display stand (black metal clamp, up to 60 × 90 cm) | RM45.00 | RM79.88 at 60 × 90 cm |
| Tripod poster stand (economy, up to 70 × 180 cm) | RM25.00 | + board at the mounting-board rate |
| A-frame 60 × 90 (pavement sign, carry handle) | RM95.00 | RM129.88 (RM174.76 printed on both sides) |
| A-frame 80 × 120 (heavy, outdoor-stable) | RM150.00 | + board at the mounting-board rate |
A human standee is a die-cut board held up by a fold-out strut or a metal stand: a 60 × 160 cm panel is RM51.65 on 4 mm PP hollow board or RM62.02 on 5 mm KT board as a plain rectangle with no support — die-cutting to shape and the strut or stand are priced on top on the product page — and any size up to 120 × 240 cm can be ordered on the human standee page. Use PP hollow board if it stands under a porch — it is waterproof; KT board is for indoors.
Boards are what make these stands heavier and more fragile to ship than a roll-up. Anything over 120 cm on a side is collected or delivered by Lalamove in the Klang Valley rather than couriered, so if the stand has to travel far, choose a roll-up or a fabric display instead.
Pop-up backdrops and tension fabric displays
For a booth back wall, a press wall or a stage, a single banner is not wide enough. Two systems cover this:
A pop-up backdrop is a concertina frame that opens to 3.44 × 2.3 m (3 × 3) or 4.14 × 2.3 m (4 × 3) with the printed graphic attached, and packs into a case.
| Frame | Soft case, with print | Hard case, with print |
|---|---|---|
| Pop-up 3 × 3 | RM1,053.00 | RM1,354.50 |
| Pop-up 4 × 3 | RM1,194.00 | RM1,503.00 |
The hard case is a wheeled moulded case that usually converts into a counter; choose it if event crews handle the backdrop.
A jumbo banner stand is the do-it-yourself alternative: two telescopic uprights on weighted feet with a crossbar top and bottom, adjustable from 4 × 4 ft up to 8 × 8 ft, for RM180, plus a printed flex banner with pole pockets at the normal banner rate — an 8 × 8 ft is RM95.99. That is a full-size backdrop for about RM276, against RM1,053 for a pop-up, in exchange for a few minutes of assembly and no case.
Tension fabric displays are dye-sublimated fabric skins zipped over aluminium frames. They are washable, crease-free and pack into a bag:
| Display | Price with print |
|---|---|
| Tension fabric barricade 90 × 150 cm / 90 × 200 cm | RM232.70 / RM286.65 |
| Door bunting display 80 / 90 / 120 / 150 cm × 205 cm | RM241 / RM252 / RM311 / RM368 |
| Tension fabric tower (curve or oblique) | RM315 |
| Tension fabric S-shape display | RM381 |
| Tension fabric promotion table | RM337 |
| Tension fabric U-shape backdrop | RM1,189 |
A promotion counter to go with any of them is RM132 unprinted or RM187.50 with a printed front; a pop-up table with a printed skirt is RM319.50.
Price comparison at a glance
Sorted from cheapest to dearest, each at its usual size, with print included where the product includes it:
| Stand | Size | Price |
|---|---|---|
| Tripod poster stand (stand only) | up to 70 × 180 cm | RM25.00 |
| Tripod bunting stand with 380gsm bunting | 60 × 160 cm | RM34.64 |
| Human standee panel, PP hollow board (before die-cut and support) | 60 × 160 cm | RM51.65 |
| Roll-up banner, economy | 85 × 200 cm | RM75.00 |
| Board display stand with printed KT board | 60 × 90 cm | RM79.88 |
| Roll-up banner, premium aluminium | 85 × 200 cm | RM122.00 |
| A-frame 60 × 90 with printed KT board | 60 × 90 cm | RM129.88 |
| Jumbo banner stand + 8 × 8 ft flex banner | 8 × 8 ft | RM275.99 |
| Pop-up backdrop 3 × 3, soft case, with print | 3.44 × 2.3 m | RM1,053.00 |
Every one of these is a flat published price on its product page. There is no quotation step and no minimum order.
Indoor vs outdoor: which stands survive wind
Most banner stands are indoor products. The honest outdoor list is short:
- A-frame 80 × 120 heavy — the weight and the splayed legs keep it up in wind.
- T-bar bunting stand with a water base — fill the base and it stays put.
- Human standee on PP hollow board — under a porch or awning only; it is waterproof, not wind-proof.
A roll-up outdoors acts as a sail and falls over, and its cassette is not sealed against rain. If the message must be outside and exposed, print a mesh banner and tie it to something fixed instead.
FAQ
What is the cheapest banner stand in Malaysia?
A tripod bunting stand with a printed 60 × 160 cm bunting is RM34.64, the cheapest floor-standing banner. The most-ordered stand, the 85 × 200 cm roll-up, is RM75 with print. All prices are published on the product pages.
How much does a roll-up banner cost in Malaysia?
RM75 for the 85 × 200 cm economy roll-up with the printed insert and carry bag, or RM122 for the premium all-aluminium version. Both prices include printing.
What size is a standard banner stand?
The standard roll-up is 85 × 200 cm. Pop-up backdrops are 3.44 × 2.3 m (3 × 3) or 4.14 × 2.3 m (4 × 3), and a jumbo banner stand adjusts from 4 × 4 ft to 8 × 8 ft.
Which banner stand can be used outdoors?
The heavy 80 × 120 A-frame and the water-base T-bar bunting stand. Roll-ups blow over and are not rain-sealed. For a fully exposed outdoor message, print a mesh banner and tie it to a fence, frame or railing rather than using a stand.
Can I reuse a banner stand with a new design?
Yes. Roll-up cassettes, board stands, A-frames and pop-up frames all take a replacement print, and the stand-only prices above are what you pay if you already have the print.
How long does a banner stand take to make?
Three working days on the standard tier: an order confirmed (paid and artwork approved) before 2pm counts that day as day 0 and is ready between 6pm and midnight on working day 3. Express, chosen at checkout, makes it the next working day for 30% of the order (minimum RM20, maximum RM150). Stands ship nationwide by courier; rigid boards over 120 cm are collected or sent by Lalamove within the Klang Valley.
Price your stand
Each stand has its own page with the live price: roll-up, tripod bunting, board display stand, A-frame, human standee, pop-up backdrop, jumbo banner stand and tension fabric displays. Related reading: backdrop printing · banner printing prices