3D Printed Letters in Malaysia

Enter the overall width and height around your complete artwork, including all words and logos. The price updates with your size, material, finish and mounting choices. Upload one file for the whole design.

Measure from the leftmost to rightmost edge and from the topmost to bottommost edge of your finished artwork. Include all lines and logos together, but no extra wall space around them. We check fine details in your artwork before production.

Black, white and grey, printed in PLA or PETG — PETG for hot or sheltered outdoor spots, PLA indoors. The colour goes right through the letter, so the edge is the same colour as the face and a knock does not reveal something different underneath. Grey hides the fine layer lines best, which is why an unpainted grey letter still looks finished close up. Choose white if you are spraying a brand colour over it, or if you are adding LED — white edges light up. Any Pantone or RAL is available through the 2K spray option.

This is the range for shapes a cutting tool physically cannot hold: fine script fonts where the strokes join at a hair-thin point, hairline serifs, domed and chamfered faces instead of a flat top, logo marks with real relief, and any depth you ask for rather than the thicknesses a sheet happens to come in. Send the vector file or the font name and we will confirm what holds together at your chosen height before anything goes on the printer.

Yes, and it is not optional — the Add to cart button stays locked until you pick one. The modules run on 12V DC, so every lit order has to include an AC–DC driver: 100W or 300W, indoor or rainproof. Wiring the LEDs straight into 240V mains destroys them the moment you switch on, and that is not covered by warranty. Take the rainproof driver for anything outdoors, and mount it somewhere your electrician can still reach in two years.

We are the factory, so we do not install it ourselves — every order ships ready to self-install, with a full-size paper template included at no charge: tape it up, mark the holes through it, and every letter lands level and evenly spaced first time. That is how the same letters go up anywhere in Malaysia or overseas. If you would rather not do it, pick a floor level in the Installation list and we arrange a partner contractor in KL and Selangor: the price shown is their estimate for a standard job — from RM500 for a ground-floor wall or fascia, stepping up floor by floor as the access equipment grows — and we confirm it with you before the visit is booked. It is one visit and one charge for your whole order, whether it is 3 letters or 30, at the highest floor among them; above the 5th floor the contractor quotes after a site survey, since that means a boom lift or a gondola and a permit from the building.