What size should a signboard be? For a standard Malaysian shoplot, the shopfront signboard is usually sized to the lot width — most shoplots are around 20 ft (6.1 m) wide, so shopfront signs commonly run 15–20 ft wide and 2–3 ft tall. But the right size depends on where the sign goes and how far away people read it from.
Common signboard sizes in Malaysia
| Use | Typical size (ft) | Approx. (cm) |
|---|---|---|
| Shopfront fascia sign | 15–20 ft × 2–3 ft | 460–610 × 60–90 cm |
| Small shop / kiosk sign | 4–8 ft × 2 ft | 120–245 × 60 cm |
| Office reception logo | 2–4 ft × 1–2 ft | 60–120 × 30–60 cm |
| Directional / door sign | 1–2 ft × 0.5–1 ft | 30–60 × 15–30 cm |
| Event backdrop | 8–10 ft × 8 ft | 245–305 × 245 cm |
| A-frame / standee | A1–A0 | 59×84 to 84×119 cm |
Poster / paper sizes (handy for indoor signs)
Full A-size table with prices: poster printing sizes in Malaysia.
- A3 — 29.7 × 42 cm
- A2 — 42 × 59.4 cm
- A1 — 59.4 × 84.1 cm
- A0 — 84.1 × 118.9 cm
How to choose the right size
- Measure the space the sign will sit in (the fascia, wall or stand) and leave a small margin.
- Match the viewing distance — a rough rule is 1 inch of letter height for every 10 ft of reading distance. A shopfront read from 50 ft needs ~5-inch lettering.
- Check the lot rules — for shopfront signs, your signboard licence and the building's guidelines may cap the size.
- Mind the material limits — large outdoor signs should use rigid ACP board; very large indoor pieces are cheapest on KT board.
Order any custom size
You don't have to pick from a fixed list. On our signboard configurator you enter any width and height (in mm or by preset like 2×4 ft), and the price updates instantly. Pick your material, add finishing like drilled holes or standoffs, upload your design, and we cut it to your exact size and deliver across Malaysia.
FAQ
What is the standard signboard size for a shop in Malaysia?
Most Malaysian shoplots are about 20 ft (6.1 m) wide, so shopfront fascia signs commonly run 15-20 ft wide and 2-3 ft tall. There is no legally fixed standard — the size follows your lot width and whatever your council approves on the signboard licence, so measure the fascia before printing.
How big should the letters on a signboard be?
A practical rule is one inch of letter height for every 10 feet of reading distance. A shopfront read from across a 50 ft road needs roughly 5-inch lettering; a reception logo read from 10 ft needs about 1 inch. Size the board around the lettering, not the other way round.
What size is an A1 or A2 sign in centimetres?
A1 is 59.4 x 84.1 cm and A2 is 42 x 59.4 cm. A3 is 29.7 x 42 cm and A0 is 84.1 x 118.9 cm. These are the usual sizes for indoor notices, A-frames and standees, and you can enter them directly in millimetres on the configurator.
Can I order a custom signboard size?
Yes. Enter any width and height and the price recalculates instantly — we cut to your exact dimensions. Each material has its own limit: ACP, HIPS and foamboard go up to 1220 x 2440 mm, while acrylic is capped at 1200 x 1800 mm.
What size signboard fits a 20 ft shoplot?
A fascia of 15-18 ft wide by 2-3 ft tall leaves a sensible margin at each end. At that width the sign is produced as several panels rather than one piece, because ACP sheets are 1220 x 2440 mm — so plan the artwork with panel joins in mind, or use a banner face stretched in a frame.