A human standee costs according to its size, board material and selected support. For example, a 600 × 600 mm (60 × 60 cm) Human Standee in PP Hollow Board 4mm is RM19.37 for one piece before delivery and with no paid options. This is a small square example; enter your intended dimensions to price a full-height cutout.
What changes the price of a human standee?
Tandaku prints human standees on rigid board and cuts them to the outline of the design. The main choices are the overall size, board material and support: a fold-out board strut or an adjustable metal stand.
The listed material rates help you compare boards before choosing your size.
| Standee material | Approximate material rate per square foot | Main reason to choose it |
|---|---|---|
| PP Hollow Board 4mm | RM5.00 | Lower material cost and a waterproof board |
| KT Board 5mm | RM6.00 | Lightweight indoor display |
| PVC Foamboard 5mm | RM9.00 | Smooth, rigid board for repeated use |
| PVC Foamboard 10mm | RM15.00 | A thicker, more substantial display |
These are material rates, not fixed prices for a complete standee at any size. Use the human standee price page to enter your dimensions and check the selected support and options. Delivery is separate.
When comparing prices, keep the size, material and support the same. A small board and a full-height cutout are different purchases even when both are described as a standee.
Which board should you choose for your display?
For a short indoor event, KT Board 5mm is a practical choice when carrying and setting up the display matters. It is the standard indoor standee material in Tandaku's range. There is little reason to choose thick PVC just because it sounds more substantial if the display only needs temporary indoor use.
PP Hollow Board 4mm has a lower listed material rate. It is waterproof corrugated board, lighter than PVC, and suitable under a porch or awning. Choose it when keeping the board cost down matters and its corrugated construction suits the job.
PVC Foamboard 5mm has a smooth, rigid face and suits a standee you intend to use repeatedly. PVC Foamboard 10mm is the thicker option for a more substantial display. Choose thickness for the way the board will be handled and used, rather than assuming thicker printing will make a blurry picture sharper.
For a broader comparison of rigid materials, see the foam board and display board guide.
How do you choose the right standee size?
Start with the place where it will stand. Measure the available height and width, then check the space behind the display for its support. A cutout that fits against a wall on paper may leave too little room for people to pass once its support is opened.
Measure the widest and tallest parts of the finished outline. An extended arm, a product held beside the body or a wide costume can determine the width even when the person in the picture looks narrow. Include those parts when preparing the order dimensions.
Tandaku lists custom human standees up to 120 × 240 cm. Treat that as the product's size limit, rather than a size you need to order. A smaller cutout may be enough for a counter area or close viewing; a floor display needs dimensions that suit its position.
Also check the route into the venue and the space available for transport and storage. Choose the size before finalising the artwork so important parts do not need an awkward crop later.
What support does a human standee need?
The human standee range offers a fold-out board strut or an adjustable metal stand. Check which support is selected in your order rather than assuming every displayed price includes the same setup.
Plan for the support as part of the display's footprint. Leave room behind the board, place it on a level surface and keep it clear of doors and walking routes. The finished outline also matters: a wide projecting arm needs space even if the support itself fits neatly behind the body.
Waterproof board does not make the assembled display resistant to wind. For a sheltered entrance, consider the position and support as well as the material. Avoid choosing a light display for an exposed position simply because its board can tolerate moisture.
If you actually want a rectangular graphic that retracts into a base, the roll-up banner guide explains that separate product.
How do you make a picture ready for standee printing?
Start with the original image file when possible. A picture copied from a chat preview or taken as a screenshot may look clear on a phone but show rough edges when enlarged. Inspect the picture at the intended print size before committing to the design.
For a human cutout, choose a photograph that includes every part you want printed. If the original photo cuts off a hand or shoe, removing the background will not restore it. Check the hair, fingers and clothing edges after removing the background, because rough selections become part of the visible outline.
Keep the proposed outline practical. Narrow projecting details are easier to knock during handling, so a simpler outline may be the better choice. Keep essential wording and graphic details comfortably inside the intended cut edge.
Match the artwork's proportions to the dimensions you order. Stretching a person to fill a different shape changes their appearance; cropping may remove something you wanted to keep. For general file preparation, use the large-format artwork checklist.
What should you check before ordering?
Confirm the overall dimensions, board material and support together. Then review the artwork against those dimensions, including the outermost edges of the cutout. Check any wording in the design before approving the file.
The product page shows the price as you enter your size. Review the selected options and delivery charge before paying, especially when comparing a budget board with a thicker reusable display. There is no minimum order quantity, so you can order a single standee.
Standard production is 3 working days. For an order paid and artwork approved before 2pm on a working day, it is ready on the third working day after it, between 6pm and 12am. Courier transit is separate, so plan around when you need the display at the venue.
FAQ
How much does a standee cost?
The price depends on its dimensions, board material and selected support. Human standee material rates include approximately RM5.00 per square foot for PP Hollow Board 4mm and RM6.00 per square foot for KT Board 5mm. Enter your size on the product page to see the price with your chosen options before delivery.
What is a standee?
A standee is a freestanding printed display. A human standee is a rigid board cut around a person or another design outline, with support behind it. A rectangular retractable banner is a different display, so check which type you are ordering.
How to make standee picture?
Choose a clear original photograph that includes the full outline you want to print. Remove the background carefully and check the edges at the intended print size. Match the artwork proportions to the ordered dimensions without stretching the subject.
How to print standee?
Choose the finished dimensions, board material and support, then prepare artwork that matches the size. On Tandaku's human standee page, enter those choices to see the price and upload your artwork. Review the design and selected options before approving it for production.