For a printed fabric table throw, measure the tabletop and decide how far the cloth should hang over each edge before ordering the overall sheet size. Position your main artwork on the front-facing drop, with enough space around it to keep folds from hiding the message. Tandaku supplies a flat fabric sheet you can drape over your own table.
What should you measure before ordering a fabric table throw?
Measure the actual table you will use, including its width, depth and height. A venue's description of a market table is less useful than measurements of the surface your cloth must cover. Check whether rounded corners, a raised edge or equipment will affect how the fabric hangs.
Then decide which sides need covering. A table against a wall may only need a presentable front and sides. At an island booth, people may approach from behind, so the back needs its own plan. If staff sit behind the table, consider where their legs, chairs and stored items will go.
Record the measurements separately before choosing the overall sheet size:
| Area | What to measure or decide | Why it matters |
|---|---|---|
| Tabletop | Width and depth of the surface | Establishes where the top panel ends |
| Front drop | Distance from the front edge to your chosen lower edge | Defines the main visible artwork area |
| Side drops | How far the cloth should hang at each end | Affects corner folds and coverage |
| Back drop | Coverage needed behind the table | Balances appearance with access for staff |
A photograph helps explain the setup, but it does not replace the measurements. Keep a simple sketch showing which edge faces visitors.
How much fabric should hang over each edge?
Choose the drop for the way the table will be used. A long front drop can hide storage beneath a sales table. A shorter drop can be enough when you only need a visible front message and want to keep fabric away from the floor.
Start with the tabletop measurements, then include the intended drops on the corresponding edges. The overall print size must cover the top as well as the hanging areas. Ordering only the size of the front face leaves no fabric to travel across the tabletop.
Test the shape with an existing plain cloth or a temporary paper mock-up. Check it from the visitor's position, with your products arranged on top. Look at where corners gather and whether the bottom edge obstructs feet or catches under chairs.
Keep the cloth clear of walkways. Extra fabric is only useful when it serves a purpose; a longer drop can create awkward folds without improving the display.
Where should the artwork go on a draped sheet?
Treat the sheet as separate visible areas even though it is printed as a flat rectangle. Mark the tabletop, front drop, sides and back on your working layout. Place the main message inside the front area, where someone approaching the stall can see it.
Leave space around important wording and graphics. A design that reaches into a corner may disappear into a fold once the cloth is draped. Artwork across the tabletop may be covered by stock, payment equipment or display trays.
Check the orientation before exporting. The front artwork needs to appear upright when that part of the cloth hangs down. A flat layout can look correct on screen while putting the message upside down on the assembled table.
Use a bold main element and keep supporting information readable. If you are using an image, judge its sharpness at the intended printed size; a file label describing it as high resolution does not establish how it will look when enlarged. See our large-format artwork preparation guide for file preparation checks.
Which fabric should you choose, and what does it cost?
Satin Fabric 110gsm is the straightforward choice for a draped indoor table display. The product description lists it for table throws, backdrops and indoor hanging displays, with a smooth surface and a soft sheen.
| Fabric | Relevant characteristic | Published rate per square metre |
|---|---|---|
| Satin Fabric 110gsm | Smooth polyester with a soft sheen, suited to table throws | RM25.19 |
| Flag Fabric 80gsm | Lightweight polyester; the printed design shows through the back in mirror | RM18.73 |
The lower-priced flag fabric may be enough for a loose decorative cloth when its lightweight appearance and mirrored show-through are acceptable. Choose it for those characteristics rather than expecting it to behave like satin. Do not assume either fabric will conceal everything beneath it without checking the material against your intended use.
Enter your overall sheet dimensions on the fabric printing page to see the exact price before finishing options and delivery. The rate is a material comparison, not the total price of your table throw. Our fabric printing guide explains the wider material choices.
Is a flat fabric sheet the same as a fitted table cover?
A flat printed sheet is draped over a table and arranged into position. A fitted cover depends on its shape and construction to match a particular table. Ordering a rectangular sheet with your artwork does not establish that it includes fitted corners, tailored panels or fastenings.
Tandaku's Fabric Signs product supplies a flat printed fabric sheet for a market table or your own display. Tables, stands and installation are separate. If your design depends on sewing, shaped corners or a particular edge treatment, confirm that requirement before ordering instead of assuming it is included.
A flat sheet is enough when you can arrange the drape yourself and do not need a tailored fit. It also lets you use a table you already have without buying a complete display unit.
What should you check before placing your order?
Check that the order dimensions describe the entire sheet, while the artwork layout identifies the areas that will remain visible. Confirm the material, quantity and any finishing options shown for your selection.
Keep a copy of the table measurements alongside the final artwork. Compare the front panel with your mock-up and check every word before submitting. Pay particular attention to artwork near corners and the edge of the tabletop.
If you need a freestanding wall behind the table, treat it as a separate display requirement. A table throw does not provide its own upright support. Order the fabric for the job it needs to do, with the display arrangement decided first.
FAQ
What size does fabric come in?
The listed maximum size for the fabric materials on Tandaku's Fabric Signs page is 2.44m × 50m. That is a material limit, not a recommended table-throw size. Choose your sheet dimensions from the tabletop and the drops you need.
How to print fabric design?
Prepare the design for the overall sheet size, then position the main artwork within the area that will hang at the front of the table. Check its orientation and keep important details away from folds. Select the fabric and size on the product page and upload your artwork.
How much does fabric printing cost?
Satin Fabric 110gsm has a published rate of RM25.19 per square metre before options and delivery. The total depends on the dimensions and choices entered for your order. Use the fabric printing page to see the exact price for your sheet.